我們所看到的濟南彩鋼瓦變形主要是由于彩鋼瓦所含水分導致其抗壓能力下降，因此會發(fā)生變形。因此，彩鋼瓦的干燥處理是制造工程中至關重要的工序，那么常用的干燥處理和研磨方法有哪些呢?

The deformation of Jinan color steel tile is mainly due to the decrease of its compressive capacity due to the moisture content of the color steel tile. Therefore, the drying treatment of color steel tile is a crucial process in manufacturing engineering. What are the common drying treatment and grinding methods?

濟南彩鋼瓦

Jinan color steel tile

常用的烘干辦法是用自己建的土窯對彩鋼瓦的原材料進行烘干處理，削減關于制品烘干的本錢。由于土窯是選用人工燒炕的辦法加熱，溫度不均勻，常常會呈現一部分現已烤干了，而有的還存在許多水分，也沒有操控好開裂和變形的幾率。

The commonly used drying method is to dry the raw materials of the color steel tile with the soil kiln built by ourselves, so as to reduce the cost of drying the products. Because the earth kiln is heated by using the method of artificial Kang burning, the temperature is not uniform, and some of them are dried, while some of them still have a lot of moisture, and there is no chance of cracking and deformation.

所以除了要進行初次的蒸汽烘干以外，在加工之前還要進行第2次的微波烘干，是的水分能夠從里往外均衡蒸騰。彩鋼瓦彩鋼瓦在施工的時分，需要對濟南彩鋼瓦進行打磨，其意圖是堅持它的漂亮性，確保施工的安 全性。關于它的打磨辦法分為干打磨、濕打磨和機械打磨三種。

Therefore, in addition to the first steam drying, the second microwave drying should be carried out before processing, so that the moisture can be evenly transpiration from inside to outside. During the construction of color steel tile, Jinan color steel tile needs to be polished. Its intention is to adhere to its beauty and ensure the safety of construction. There are three grinding methods: dry grinding, wet grinding and mechanical grinding.

機械打磨彩鋼瓦大面積施工時，為了進步工作效率，可選用機械打磨辦法，如電動打磨機，有圓盤式和振蕩式。干打磨選用砂紙進行打磨，適用于硬而脆的漆種的打磨，這種對彩鋼瓦進行打磨的缺 陷是操作過程中將發(fā)生許多粉塵，影響環(huán)境衛(wèi)生。

In order to improve the work efficiency, mechanical grinding method can be used in large area construction of mechanical grinding color steel tile, such as electric grinding machine, disc type and oscillating type. Sand paper is used for dry grinding, which is suitable for grinding hard and brittle paint. The defect of this kind of grinding for color steel tile is that a lot of dust will occur in the operation process, which will affect the environmental health.

濕打磨用水砂紙蘸水或肥皂水打磨彩鋼瓦，水磨能削減磨痕，進步涂層的滑潤度，而且省砂紙、省力，但水磨后應留意噴涂基層油漆時，一是要等水磨層要干透后才干涂基層油漆，不然漆層很簡單泛白，別的吸水性很強的底材也不宜水磨。

Wet grinding uses sandpaper dipped in water or soapy water to polish color steel tile. Water grinding can reduce grinding marks, improve the smoothness of coating, and save sandpaper and labor. However, when spraying base paint after water grinding, one should wait until the water grinding layer is dry, otherwise the paint layer is very simple and white, and other base materials with strong water absorption are not suitable for water grinding.

以上就是濟南彩鋼瓦的烘干和打磨方法，希望本文對你有所幫助。此外大家在進行烘干和打磨時一定要格外注意，避免造成一些不必要的麻煩!

The above is the Jinan color steel tile drying and grinding methods, I hope this article can help you. In addition, we must pay special attention to drying and grinding, to avoid causing some unnecessary trouble!